Classic car show thread

[apc2010]

OH NO IT PIGGIN' DOES NOT!

You ruined the panto......

[GROWLER]

Just thought I'd take it out for a a lickle 'tickle' 'round the block like, you know, before I tuck it up, all warm and cosy like, read it a chapter from the Haynes manual and give it a nice hot mug of Cassy R.

Took the o/s headlight bulb out this avvy, as it's been going on and off on its own, a bit intermittent like.
The bulb terminals were all green, so i shined 'em all up nice, and it werks an absolute treat now.

Unfortunately, the presumably upside down o/s headlight bulb now lights up up the sky.  

[GROWLER]

OH NO IT PIGGIN' DOES NOT!

You ruined the panto......

Oh no I didn't.

[apc2010]

OH NO IT PIGGIN' DOES NOT!

You ruined the panto......

Oh no I didn't.

Oh yes you did.......

[GROWLER]

Going to RE-FIT the headlamp bulb tomozo anyway, in fact, I may have some higher intensity ones 'anging around in the    corner of the garage, so I may upgrade instead.

Then, rear anti roll bar rub down and paint, followed by a wheels off rub down and re-paint refurbishment.

Might have a go at fitting the electronic ignition module that I bought last year too.

Be all nice and ready for its first show near Maccclesfield on Monday.

[apc2010]

Going to RE-FIT the headlamp bulb tomozo anyway, in fact, I may have some higher intensity ones 'anging around in the    corner of the garage, so I may upgrade instead.

Then, rear anti roll bar rub down and paint, followed by a wheels off rub down and re-paint refurbishment.

Might have a go at fitting the electronic ignition module that I bought last year too.

Be all nice and ready for its first show near Maccclesfield on Monday.

I used to refurb wheels .....

[GROWLER]

Going to RE-FIT the headlamp bulb tomozo anyway, in fact, I may have some higher intensity ones 'anging around in the    corner of the garage, so I may upgrade instead.

Then, rear anti roll bar rub down and paint, followed by a wheels off rub down and re-paint refurbishment.

Might have a go at fitting the electronic ignition module that I bought last year too.

Be all nice and ready for its first show near Maccclesfield on Monday.

I used to refurb wheels .....

These are the original 'sculptered' steel wheels, but the holes are slightly rusty around their edges, and a few rusty stone chips too.

I looked into doing alloy re-furbs, but every man and his dog (literally in one case of one of the mobile lads I know  ) is doing it now, which is driving prices southwards.

Were you mobby or static apey?

[apc2010]

Going to RE-FIT the headlamp bulb tomozo anyway, in fact, I may have some higher intensity ones 'anging around in the    corner of the garage, so I may upgrade instead.

Then, rear anti roll bar rub down and paint, followed by a wheels off rub down and re-paint refurbishment.

Might have a go at fitting the electronic ignition module that I bought last year too.

Be all nice and ready for its first show near Maccclesfield on Monday.

I used to refurb wheels .....

These are the original 'sculptered' steel wheels, but the holes are slightly rusty around their edges, and a few rusty stone chips too.

I looked into doing alloy re-furbs, but every man and his dog (literally in one case of one of the mobile lads I know  ) is doing it now, which is driving prices southwards.

Were you mobby or static apey?

I started the mobile thing in the UK .......did it and built and sold the machines ......

[GROWLER]

How long a go was that then?

Why don't you set up a franchise out there?

[apc2010]

How long a go was that then?

Why don't you set up a franchise out there?

Here was going do it .......but labour is so cheap (pakis n stuff ) ,,,not worth it ....if you see the machine like a record player ..(turntable n arm) able just to do rims or whole wheel they are/were mine ........

could do the rim without a bead breaker........

[GROWLER]

Found me owld Krooklok and key amongst the spiders today too. 
Won't stop 'em if they're determined enough like, but it'll slow the scumbags down.

Going to have a proper imobiliser fitted shortly, along with MoMo too.

[apc2010]

Found me owld Krooklok and key amongst the spiders today too. 
Won't stop 'em if they're determined enough like, but it'll slow the scumbags down.

Going to have a proper imobiliser fitted shortly, along with MoMo too.

Hit em with it ......much betterer.......

[GROWLER]

Found me owld Krooklok and key amongst the spiders today too. 
Won't stop 'em if they're determined enough like, but it'll slow the scumbags down.

Going to have a proper imobiliser fitted shortly, along with MoMo too.

Hit em with it ......much betterer.......

Funny you should say that, but I did actually have it by the front door...along with a few other 'implements'  .... when all the riots were kicking off over here nationwide and a bit too close for comfort one night here a couple of years ago.

[apc2010]

Found me owld Krooklok and key amongst the spiders today too. 
Won't stop 'em if they're determined enough like, but it'll slow the scumbags down.

Going to have a proper imobiliser fitted shortly, along with MoMo too.

Hit em with it ......much betterer.......

Funny you should say that, but I did actually have it by the front door...along with a few other 'implements'  .... when all the riots were kicking off over here nationwide and a bit too close for comfort one night here a couple of years ago.

Self defence .....    

[GROWLER]

Found me owld Krooklok and key amongst the spiders today too. 
Won't stop 'em if they're determined enough like, but it'll slow the scumbags down.

Going to have a proper imobiliser fitted shortly, along with MoMo too.

Hit em with it ......much betterer.......

Funny you should say that, but I did actually have it by the front door...along with a few other 'implements'  .... when all the riots were kicking off over here nationwide and a bit too close for comfort one night here a couple of years ago.

Self defence .....    

Absobloodylutely.

You hurt my cars, I'll break yer friggin' legs.